/* $OpenBSD: if_wireg.h,v 1.40 2011/06/21 16:52:45 tedu Exp $ */ /* * Copyright (c) 1997, 1998, 1999 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * From: if_wireg.h,v 1.8.2.2 2001/08/25 00:48:25 nsayer Exp $ */ #define WI_DELAY 5 #define WI_TIMEOUT (500000/WI_DELAY) /* 500ms */ #define WI_PORT0 0 #define WI_PORT1 1 #define WI_PORT2 2 #define WI_PORT3 3 #define WI_PORT4 4 #define WI_PORT5 5 /* Default port: 0 (only 0 exists on stations) */ #define WI_DEFAULT_PORT (WI_PORT0 << 8) /* Default TX rate: 2Mbps, auto fallback */ #define WI_DEFAULT_TX_RATE 3 /* Default network name (wildcard) */ #define WI_DEFAULT_NETNAME "" #define WI_DEFAULT_AP_DENSITY 1 #define WI_DEFAULT_RTS_THRESH 2347 #define WI_DEFAULT_DATALEN 2304 #define WI_DEFAULT_CREATE_IBSS 0 #define WI_DEFAULT_PM_ENABLED 0 #define WI_DEFAULT_MAX_SLEEP 100 #define WI_DEFAULT_NODENAME "WaveLAN/IEEE node" #define WI_DEFAULT_IBSS "IBSS" #define WI_DEFAULT_CHAN 3 #define WI_DEFAULT_ROAMING 1 #define WI_DEFAULT_AUTHTYPE 1 #define WI_DEFAULT_DIVERSITY 0 /* * register space access macros */ #define CSR_WRITE_4(sc, reg, val) \ bus_space_write_4(sc->wi_btag, sc->wi_bhandle, \ (sc->sc_pci ? reg * 2: reg), (val)) #define CSR_WRITE_2(sc, reg, val) \ bus_space_write_2(sc->wi_btag, sc->wi_bhandle, \ (sc->sc_pci ? reg * 2: reg), (val)) #define CSR_WRITE_1(sc, reg, val) \ bus_space_write_1(sc->wi_btag, sc->wi_bhandle, \ (sc->sc_pci ? reg * 2: reg), val) #define CSR_READ_4(sc, reg) \ bus_space_read_4(sc->wi_btag, sc->wi_bhandle, \ (sc->sc_pci ? reg * 2: reg)) #define CSR_READ_2(sc, reg) \ bus_space_read_2(sc->wi_btag, sc->wi_bhandle, \ (sc->sc_pci ? reg * 2: reg)) #define CSR_READ_1(sc, reg) \ bus_space_read_1(sc->wi_btag, sc->wi_bhandle, \ (sc->sc_pci ? reg * 2: reg)) #define CSR_READ_RAW_2(sc, ba, dst, sz) \ bus_space_read_raw_multi_2((sc)->wi_btag, \ (sc)->wi_bhandle, \ (sc->sc_pci? ba * 2: ba), (dst), (sz)) #define CSR_WRITE_RAW_2(sc, ba, dst, sz) \ bus_space_write_raw_multi_2((sc)->wi_btag, \ (sc)->wi_bhandle, \ (sc->sc_pci? ba * 2: ba), (dst), (sz)) /* * The WaveLAN/IEEE cards contain an 802.11 MAC controller which Lucent * calls 'Hermes.' In typical fashion, getting documentation about this * controller is about as easy as squeezing blood from a stone. Here * is more or less what I know: * * - The Hermes controller is firmware driven, and the host interacts * with the Hermes via a firmware interface, which can change. * * - The Hermes is described in a document called: "Hermes Firmware * WaveLAN/IEEE Station Functions," document #010245, which of course * Lucent will not release without an NDA. * * - Lucent has created a library called HCF (Hardware Control Functions) * though which it wants developers to interact with the card. The HCF * is needlessly complex, ill conceived and badly documented. Actually, * the comments in the HCP code itself aren't bad, but the publicly * available manual that comes with it is awful, probably due largely to * the fact that it has been emasculated in order to hide information * that Lucent wants to keep proprietary. The purpose of the HCF seems * to be to insulate the driver programmer from the Hermes itself so that * Lucent has an excuse not to release programming in for it. * * - Lucent only makes available documentation and code for 'HCF Light' * which is a stripped down version of HCF with certain features not * implemented, most notably support for 802.11 frames. * * - The HCF code which I have seen blows goats. Whoever decided to * use a 132 column format should be shot. * * Rather than actually use the Lucent HCF library, I have stripped all * the useful information from it and used it to create a driver in the * usual BSD form. Note: I don't want to hear anybody whining about the * fact that the Lucent code is GPLed and mine isn't. I did not actually * put any of Lucent's code in this driver: I only used it as a reference * to obtain information about the underlying hardware. The Hermes * programming interface is not GPLed, so bite me. */ /* * Size of Hermes & Prism2 I/O space. */ #define WI_IOSIZ 0x40 /* * Hermes register definitions and what little I know about them. */ /* Hermes command/status registers. */ #define WI_COMMAND 0x00 #define WI_PARAM0 0x02 #define WI_PARAM1 0x04 #define WI_PARAM2 0x06 #define WI_STATUS 0x08 #define WI_RESP0 0x0A #define WI_RESP1 0x0C #define WI_RESP2 0x0E /* Command register values. */ #define WI_CMD_BUSY 0x8000 /* busy bit */ #define WI_CMD_INI 0x0000 /* initialize */ #define WI_CMD_ENABLE 0x0001 /* enable */ #define WI_CMD_DISABLE 0x0002 /* disable */ #define WI_CMD_DIAG 0x0003 #define WI_CMD_ALLOC_MEM 0x000A /* allocate NIC memory */ #define WI_CMD_TX 0x000B /* transmit */ #define WI_CMD_NOTIFY 0x0010 #define WI_CMD_INQUIRE 0x0011 #define WI_CMD_ACCESS 0x0021 #define WI_CMD_PROGRAM 0x0022 #define WI_CMD_READ_MIF 0x0030 /* prism2 */ #define WI_CMD_WRITE_MIF 0x0031 /* prism2 */ #define WI_CMD_CODE_MASK 0x003F /* * Reclaim qualifier bit, applicable to the * TX and INQUIRE commands. */ #define WI_RECLAIM 0x0100 /* reclaim NIC memory */ /* * ACCESS command qualifier bits. */ #define WI_ACCESS_READ 0x0000 #define WI_ACCESS_WRITE 0x0100 /* * PROGRAM command qualifier bits. */ #define WI_PROGRAM_DISABLE 0x0000 #define WI_PROGRAM_ENABLE_RAM 0x0100 #define WI_PROGRAM_ENABLE_NVRAM 0x0200 #define WI_PROGRAM_NVRAM 0x0300 /* Status register values */ #define WI_STAT_CMD_CODE 0x003F #define WI_STAT_DIAG_ERR 0x0100 #define WI_STAT_INQ_ERR 0x0500 #define WI_STAT_CMD_RESULT 0x7F00 /* memory handle management registers */ #define WI_INFO_FID 0x10 #define WI_RX_FID 0x20 #define WI_ALLOC_FID 0x22 #define WI_TX_CMP_FID 0x24 /* * Buffer Access Path (BAP) registers. * These are I/O channels. I believe you can use each one for * any desired purpose independently of the other. In general * though, we use BAP1 for reading and writing LTV records and * reading received data frames, and BAP0 for writing transmit * frames. This is a convention though, not a rule. */ #define WI_SEL0 0x18 #define WI_SEL1 0x1A #define WI_OFF0 0x1C #define WI_OFF1 0x1E #define WI_DATA0 0x36 #define WI_DATA1 0x38 #define WI_BAP0 WI_DATA0 #define WI_BAP1 WI_DATA1 #define WI_OFF_BUSY 0x8000 #define WI_OFF_ERR 0x4000 #define WI_OFF_DATAOFF 0x0FFF /* Event registers */ #define WI_EVENT_STAT 0x30 /* Event status */ #define WI_INT_EN 0x32 /* Interrupt enable/disable */ #define WI_EVENT_ACK 0x34 /* Ack event */ /* Events */ #define WI_EV_TICK 0x8000 /* aux timer tick */ #define WI_EV_RES 0x4000 /* controller h/w error (time out) */ #define WI_EV_INFO_DROP 0x2000 /* no RAM to build unsolicited frame */ #define WI_EV_NO_CARD 0x0800 /* card removed (hunh?) */ #define WI_EV_DUIF_RX 0x0400 /* wavelan management packet received */ #define WI_EV_INFO 0x0080 /* async info frame */ #define WI_EV_CMD 0x0010 /* command completed */ #define WI_EV_ALLOC 0x0008 /* async alloc/reclaim completed */ #define WI_EV_TX_EXC 0x0004 /* async xmit completed with failure */ #define WI_EV_TX 0x0002 /* async xmit completed successfully */ #define WI_EV_RX 0x0001 /* async rx completed */ #define WI_INTRS \ (WI_EV_RX|WI_EV_TX|WI_EV_TX_EXC|WI_EV_ALLOC|WI_EV_INFO|WI_EV_INFO_DROP) /* Host software registers */ #define WI_SW0 0x28 #define WI_SW1 0x2A #define WI_SW2 0x2C #define WI_SW3 0x2E #define WI_CNTL 0x14 #define WI_CNTL_AUX_ENA 0xC000 #define WI_CNTL_AUX_ENA_STAT 0xC000 #define WI_CNTL_AUX_DIS_STAT 0x0000 #define WI_CNTL_AUX_ENA_CNTL 0x8000 #define WI_CNTL_AUX_DIS_CNTL 0x4000 #define WI_AUX_PAGE 0x3A #define WI_AUX_OFFSET 0x3C #define WI_AUX_DATA 0x3E #define WI_COR_OFFSET 0x40 /* COR attribute offset of card */ #define WI_COR_IOMODE 0x41 /* Enable i/o mode with level irqs */ #define WI_PLX_LOCALRES 0x14 /* PLX chip's local registers */ #define WI_PLX_MEMRES 0x18 /* Prism attribute memory (PLX) */ #define WI_PLX_IORES 0x1C /* Prism I/O space (PLX) */ #define WI_PLX_INTCSR 0x4C /* PLX Interrupt CSR */ #define WI_PLX_INTEN 0x40 /* PCI Interrupt Enable bit */ #define WI_PLX_LINT1STAT 0x04 /* Local interrupt 1 status bit */ #define WI_PLX_COR_OFFSET 0x3E0 /* COR attribute offset of card */ #define WI_ACEX_CMDRES 0x10 /* BAR0 (I/O) for ACEX-based bridge */ #define WI_ACEX_LOCALRES 0x14 /* BAR1 (I/O) for ACEX-based bridge */ #define WI_ACEX_IORES 0x18 /* BAR2 (I/O) for ACEX-based bridge */ #define WI_ACEX_COR_OFFSET 0xe0 /* COR attribute offset of card */ #define WI_TMD_LOCALRES 0x14 /* TMD chip's local registers */ #define WI_TMD_IORES 0x18 /* Prism I/O space (TMD) */ #define WI_DRVR_MAGIC 0x4A2D /* Magic number for card detection */ /* * PCI Host Interface Registers (HFA3842 Specific) * The value of all Register's Offset, such as WI_INFO_FID and WI_PARAM0, * has doubled. * About WI_PCI_COR: In this Register, only soft-reset bit implement; Bit(7). */ #define WI_PCI_CBMA 0x10 #define WI_PCI_COR_OFFSET 0x4C #define WI_PCI_HCR 0x5C #define WI_PCI_MASTER0_ADDRH 0x80 #define WI_PCI_MASTER0_ADDRL 0x84 #define WI_PCI_MASTER0_LEN 0x88 #define WI_PCI_MASTER0_CON 0x8C #define WI_PCI_STATUS 0x98 #define WI_PCI_MASTER1_ADDRH 0xA0 #define WI_PCI_MASTER1_ADDRL 0xA4 #define WI_PCI_MASTER1_LEN 0xA8 #define WI_PCI_MASTER1_CON 0xAC #define WI_COR_SOFT_RESET (1 << 7) #define WI_COR_CLEAR 0x00 /* * One form of communication with the Hermes is with what Lucent calls * LTV records, where LTV stands for Length, Type and Value. The length * and type are 16 bits and are in native byte order. The value is in * multiples of 16 bits and is in little endian byte order. */ struct wi_ltv_gen { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_val; }; struct wi_ltv_str { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_str[17]; }; #define WI_SETVAL(recno, val) \ do { \ struct wi_ltv_gen g; \ \ g.wi_len = 2; \ g.wi_type = recno; \ g.wi_val = htole16(val); \ wi_write_record(sc, &g); \ } while (0) #define WI_SETSTR(recno, str) \ do { \ struct wi_ltv_str s; \ int l; \ \ l = (str.i_len + 1) & ~0x1; \ bzero(&s, sizeof(s)); \ s.wi_len = (l / 2) + 2; \ s.wi_type = recno; \ s.wi_str[0] = htole16(str.i_len); \ bcopy(str.i_nwid, &s.wi_str[1], str.i_len); \ wi_write_record(sc, (struct wi_ltv_gen *)&s); \ } while (0) /* * Download buffer location and length (0xFD01). */ #define WI_RID_DNLD_BUF 0xFD01 struct wi_ltv_dnld_buf { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_buf_pg; /* page addr of intermediate dl buf*/ u_int16_t wi_buf_off; /* offset of idb */ u_int16_t wi_buf_len; /* len of idb */ }; /* * Mem sizes (0xFD02). */ #define WI_RID_MEMSZ 0xFD02 struct wi_ltv_memsz { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_mem_ram; u_int16_t wi_mem_nvram; }; /* * NIC Identification (0xFD0B == WI_RID_CARD_ID) */ struct wi_ltv_ver { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_ver[4]; }; /* * List of intended regulatory domains (WI_RID_DOMAINS = 0xFD11). */ struct wi_ltv_domains { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_domains[6]; }; /* * CIS struct (0xFD13 == WI_RID_CIS). */ struct wi_ltv_cis { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_cis[240]; }; /* * Communications quality (0xFD43 == WI_RID_COMMQUAL). */ struct wi_ltv_commqual { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_coms_qual; u_int16_t wi_sig_lvl; u_int16_t wi_noise_lvl; }; /* * Actual system scale thresholds (0xFD46 == WI_RID_SCALETHRESH). */ struct wi_ltv_scalethresh { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_energy_detect; u_int16_t wi_carrier_detect; u_int16_t wi_defer; u_int16_t wi_cell_search; u_int16_t wi_out_of_range; u_int16_t wi_delta_snr; }; /* * PCF info struct (0xFD87 == WI_RID_PCF). */ struct wi_ltv_pcf { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_energy_detect; u_int16_t wi_carrier_detect; u_int16_t wi_defer; u_int16_t wi_cell_search; u_int16_t wi_range; }; /* * Connection control characteristics (0xFC00 == WI_RID_PORTTYPE). * 1 == Basic Service Set (BSS) * 2 == Wireless Distribution System (WDS) * 3 == Pseudo IBSS (aka ad-hoc demo) * 4 == IBSS */ #define WI_PORTTYPE_BSS 0x1 #define WI_PORTTYPE_WDS 0x2 #define WI_PORTTYPE_ADHOC 0x3 #define WI_PORTTYPE_IBSS 0x4 #define WI_PORTTYPE_HOSTAP 0x6 /* * Mac addresses. */ struct wi_ltv_macaddr { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_mac_addr[3]; }; /* * Station set identification (SSID). */ struct wi_ltv_ssid { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_id[17]; }; /* * Set our station name (0xFC0E == WI_RID_NODENAME). */ struct wi_ltv_nodename { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_nodename[17]; }; /* * Multicast addresses to be put in filter. We're allowed up * to 16 addresses in the filter (0xFC80 == WI_RID_MCAST). */ struct wi_ltv_mcast { u_int16_t wi_len; u_int16_t wi_type; struct ether_addr wi_mcast[16]; }; /* * Get supported data rates (0xFDC6 == WI_RID_DATA_RATES). */ struct wi_ltv_rates { u_int16_t wi_len; u_int16_t wi_type; u_int8_t wi_rates[10]; }; /* * Supported rates. */ #define WI_SUPPRATES_1M 0x0001 #define WI_SUPPRATES_2M 0x0002 #define WI_SUPPRATES_5M 0x0004 #define WI_SUPPRATES_11M 0x0008 #define WI_RATES_BITS "\20\0011M\0022M\0035.5M\00411M" /* * Information frame types. */ #define WI_INFO_NOTIFY 0xF000 /* Handover address */ #define WI_INFO_COUNTERS 0xF100 /* Statistics counters */ #define WI_INFO_SCAN_RESULTS 0xF101 /* Scan results */ #define WI_INFO_LINK_STAT 0xF200 /* Link status */ #define WI_INFO_ASSOC_STAT 0xF201 /* Association status */ /* * Hermes transmit/receive frame structure */ struct wi_frame { u_int16_t wi_status; /* 0x00 */ u_int16_t wi_rsvd0; /* 0x02 */ u_int16_t wi_rsvd1; /* 0x04 */ u_int16_t wi_q_info; /* 0x06 */ u_int16_t wi_rsvd2; /* 0x08 */ u_int8_t wi_tx_rtry; /* 0x0A */ u_int8_t wi_tx_rate; /* 0x0A */ u_int16_t wi_tx_ctl; /* 0x0C */ u_int16_t wi_frame_ctl; /* 0x0E */ u_int16_t wi_id; /* 0x10 */ u_int8_t wi_addr1[6]; /* 0x12 */ u_int8_t wi_addr2[6]; /* 0x18 */ u_int8_t wi_addr3[6]; /* 0x1E */ u_int16_t wi_seq_ctl; /* 0x24 */ u_int8_t wi_addr4[6]; /* 0x26 */ u_int16_t wi_dat_len; /* 0x2C */ u_int8_t wi_dst_addr[6]; /* 0x2E */ u_int8_t wi_src_addr[6]; /* 0x34 */ u_int16_t wi_len; /* 0x3A */ u_int16_t wi_dat[3]; /* 0x3C */ /* SNAP header */ u_int16_t wi_type; /* 0x42 */ }; #define WI_802_3_OFFSET 0x2E #define WI_802_11_OFFSET 0x44 #define WI_802_11_OFFSET_RAW 0x3C #define WI_802_11_OFFSET_HDR 0x0E #define WI_STAT_BADCRC 0x0001 #define WI_STAT_UNDECRYPTABLE 0x0002 #define WI_STAT_ERRSTAT 0x0003 #define WI_STAT_MAC_PORT 0x0700 #define WI_STAT_1042 0x2000 /* RFC1042 encoded */ #define WI_STAT_TUNNEL 0x4000 /* Bridge-tunnel encoded */ #define WI_STAT_WMP_MSG 0x6000 /* WaveLAN-II management protocol */ #define WI_STAT_MGMT 0x8000 /* 802.11b management frames */ #define WI_RXSTAT_MSG_TYPE 0xE000 #define WI_ENC_TX_802_3 0x00 #define WI_ENC_TX_802_11 0x11 #define WI_ENC_TX_MGMT 0x08 #define WI_ENC_TX_E_II 0x0E #define WI_ENC_TX_1042 0x00 #define WI_ENC_TX_TUNNEL 0xF8 #define WI_TXCNTL_MACPORT 0x00FF #define WI_TXCNTL_STRUCTTYPE 0xFF00 #define WI_TXCNTL_TX_EX 0x0004 #define WI_TXCNTL_TX_OK 0x0002 #define WI_TXCNTL_NOCRYPT 0x0080 /* * SNAP (sub-network access protocol) constants for transmission * of IP datagrams over IEEE 802 networks, taken from RFC1042. * We need these for the LLC/SNAP header fields in the TX/RX frame * structure. */ #define WI_SNAP_K1 0xaa /* assigned global SAP for SNAP */ #define WI_SNAP_K2 0x00 #define WI_SNAP_CONTROL 0x03 /* unnumbered information format */ #define WI_SNAP_WORD0 (WI_SNAP_K1 | (WI_SNAP_K1 << 8)) #define WI_SNAP_WORD1 (WI_SNAP_K2 | (WI_SNAP_CONTROL << 8)) #define WI_SNAPHDR_LEN 0x6 #define WI_FCS_LEN 0x4 #define WI_ETHERTYPE_LEN 0x2 /* * HFA3861/3863 (BBP) Control Registers */ #define WI_HFA384X_CR_A_D_TEST_MODES2 0x1a #define WI_HFA384X_CR_MANUAL_TX_POWER 0x3e