/* $OpenBSD: rdcphy.c,v 1.5 2022/04/19 03:26:33 kevlo Exp $ */ /*- * Copyright (c) 2010, Pyun YongHyeon * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Driver for the RDC Semiconductor R6040 10/100 PHY. */ #include #include #include #include #include #include #include #include #include #include #include #define MII_RDCPHY_DEBUG 0x11 #define DEBUG_JABBER_DIS 0x0040 #define DEBUG_LOOP_BACK_10MBPS 0x0400 #define MII_RDCPHY_CTRL 0x14 #define CTRL_SQE_ENB 0x0100 #define CTRL_NEG_POLARITY 0x0400 #define CTRL_AUTO_POLARITY 0x0800 #define CTRL_MDIXSEL_RX 0x2000 #define CTRL_MDIXSEL_TX 0x4000 #define CTRL_AUTO_MDIX_DIS 0x8000 #define MII_RDCPHY_CTRL2 0x15 #define CTRL2_LED_DUPLEX 0x0000 #define CTRL2_LED_DUPLEX_COL 0x0008 #define CTRL2_LED_ACT 0x0010 #define CTRL2_LED_SPEED_ACT 0x0018 #define CTRL2_LED_BLK_100MBPS_DIS 0x0020 #define CTRL2_LED_BLK_10MBPS_DIS 0x0040 #define CTRL2_LED_BLK_LINK_ACT_DIS 0x0080 #define CTRL2_SDT_THRESH_MASK 0x3E00 #define CTRL2_TIMING_ERR_SEL 0x4000 #define CTRL2_LED_BLK_80MS 0x8000 #define CTRL2_LED_BLK_160MS 0x0000 #define CTRL2_LED_MASK 0x0018 #define MII_RDCPHY_STATUS 0x16 #define STATUS_AUTO_MDIX_RX 0x0200 #define STATUS_AUTO_MDIX_TX 0x0400 #define STATUS_NEG_POLARITY 0x0800 #define STATUS_FULL_DUPLEX 0x1000 #define STATUS_SPEED_10 0x0000 #define STATUS_SPEED_100 0x2000 #define STATUS_SPEED_MASK 0x6000 #define STATUS_LINK_UP 0x8000 /* Analog test register 2 */ #define MII_RDCPHY_TEST2 0x1A #define TEST2_PWR_DOWN 0x0200 struct rdcphy_softc { struct mii_softc sc_mii; int mii_link_tick; #define RDCPHY_MANNEG_TICK 3 }; int rdcphy_service(struct mii_softc *, struct mii_data *, int); void rdcphy_attach(struct device *, struct device *, void *); int rdcphy_match(struct device *, void *, void *); void rdcphy_status(struct mii_softc *); const struct mii_phy_funcs rdcphy_funcs = { rdcphy_service, rdcphy_status, mii_phy_reset, }; static const struct mii_phydesc rdcphys[] = { { MII_OUI_RDC, MII_MODEL_RDC_R6040, MII_STR_RDC_R6040 }, { MII_OUI_RDC, MII_MODEL_RDC_R6040_2, MII_STR_RDC_R6040_2 }, { 0, 0, NULL }, }; const struct cfattach rdcphy_ca = { sizeof(struct rdcphy_softc), rdcphy_match, rdcphy_attach, mii_phy_detach }; struct cfdriver rdcphy_cd = { NULL, "rdcphy", DV_DULL }; int rdcphy_match(struct device *parent, void *match, void *aux) { struct mii_attach_args *ma = aux; if (mii_phy_match(ma, rdcphys) != NULL) return (10); return (0); } void rdcphy_attach(struct device *parent, struct device *self, void *aux) { struct rdcphy_softc *sc = (struct rdcphy_softc *)self; struct mii_attach_args *ma = aux; struct mii_data *mii = ma->mii_data; const struct mii_phydesc *mpd; mpd = mii_phy_match(ma, rdcphys); printf(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2)); sc->sc_mii.mii_inst = mii->mii_instance; sc->sc_mii.mii_phy = ma->mii_phyno; sc->sc_mii.mii_funcs = &rdcphy_funcs; sc->sc_mii.mii_pdata = mii; sc->sc_mii.mii_flags = ma->mii_flags; PHY_RESET(&sc->sc_mii); sc->sc_mii.mii_capabilities = PHY_READ(&sc->sc_mii, MII_BMSR) & ma->mii_capmask; if (sc->sc_mii.mii_capabilities & BMSR_EXTSTAT) sc->sc_mii.mii_extcapabilities = PHY_READ(&sc->sc_mii, MII_EXTSR); if (sc->sc_mii.mii_capabilities & BMSR_MEDIAMASK) mii_phy_add_media(&sc->sc_mii); } int rdcphy_service(struct mii_softc *self, struct mii_data *mii, int cmd) { struct rdcphy_softc *sc = (struct rdcphy_softc *)self; struct ifmedia_entry *ife = mii->mii_media.ifm_cur; int reg; if ((sc->sc_mii.mii_dev.dv_flags & DVF_ACTIVE) == 0) return (ENXIO); switch (cmd) { case MII_POLLSTAT: /* * If we're not polling our PHY instance, just return. */ if (IFM_INST(ife->ifm_media) != sc->sc_mii.mii_inst) return (0); break; case MII_MEDIACHG: /* * If the media indicates a different PHY instance, * isolate ourselves. */ if (IFM_INST(ife->ifm_media) != sc->sc_mii.mii_inst) { reg = PHY_READ(&sc->sc_mii, MII_BMCR); PHY_WRITE(&sc->sc_mii, MII_BMCR, reg | BMCR_ISO); return (0); } /* * If the interface is not up, don't do anything. */ if ((mii->mii_ifp->if_flags & IFF_UP) == 0) break; mii_phy_setmedia(&sc->sc_mii); switch (IFM_SUBTYPE(ife->ifm_media)) { case IFM_100_TX: case IFM_10_T: /* * Report fake lost link event to parent * driver. This will stop MAC of parent * driver and make it possible to reconfigure * MAC after completion of link establishment. * Note, the parent MAC seems to require * restarting MAC when underlying any PHY * configuration was changed even if the * resolved speed/duplex was not changed at * all. */ mii->mii_media_status = 0; mii->mii_media_active = IFM_ETHER | IFM_NONE; sc->mii_link_tick = RDCPHY_MANNEG_TICK; /* Immediately report link down. */ mii_phy_update(&sc->sc_mii, MII_MEDIACHG); return (0); default: break; } break; case MII_TICK: /* * If we're not currently selected, just return. */ if (IFM_INST(ife->ifm_media) != sc->sc_mii.mii_inst) return (0); if (mii_phy_tick(&sc->sc_mii) == EJUSTRETURN) return (0); if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) { /* * It seems the PHY hardware does not correctly * report link status changes when manual link * configuration is in progress. It is also * possible for the PHY to complete establishing * a link within one second such that mii(4) * did not notice the link change. To workaround * the issue, emulate lost link event and wait * for 3 seconds when manual link configuration * is in progress. 3 seconds would be long * enough to absorb transient link flips. */ if (sc->mii_link_tick > 0) { sc->mii_link_tick--; return (0); } } break; } /* Update the media status. */ mii_phy_status(&sc->sc_mii); /* Callback if something changed. */ mii_phy_update(&sc->sc_mii, cmd); return (0); } void rdcphy_status(struct mii_softc *sc) { struct mii_data *mii = sc->mii_pdata; struct ifmedia_entry *ife; int bmsr, bmcr, physts; ife = mii->mii_media.ifm_cur; mii->mii_media_status = IFM_AVALID; mii->mii_media_active = IFM_ETHER; bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR); physts = PHY_READ(sc, MII_RDCPHY_STATUS); if (physts & STATUS_LINK_UP) mii->mii_media_status |= IFM_ACTIVE; bmcr = PHY_READ(sc, MII_BMCR); if (bmcr & BMCR_ISO) { mii->mii_media_active |= IFM_NONE; mii->mii_media_status = 0; return; } if (bmcr & BMCR_LOOP) mii->mii_media_active |= IFM_LOOP; if (bmcr & BMCR_AUTOEN) { if (!(bmsr & BMSR_ACOMP)) { /* Erg, still trying, I guess... */ mii->mii_media_active |= IFM_NONE; return; } } switch (physts & STATUS_SPEED_MASK) { case STATUS_SPEED_100: mii->mii_media_active |= IFM_100_TX; break; case STATUS_SPEED_10: mii->mii_media_active |= IFM_10_T; break; default: mii->mii_media_active |= IFM_NONE; return; } if ((physts & STATUS_FULL_DUPLEX) != 0) mii->mii_media_active |= IFM_FDX | mii_phy_flowstatus(sc); else mii->mii_media_active |= IFM_HDX; }