/* $OpenBSD: puc.c,v 1.31 2022/03/11 18:00:51 mpi Exp $ */ /* $NetBSD: puc.c,v 1.3 1999/02/06 06:29:54 cgd Exp $ */ /* * Copyright (c) 1996, 1998, 1999 * Christopher G. Demetriou. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Christopher G. Demetriou * for the NetBSD Project. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * PCI "universal" communication card device driver, glues com, lpt, * and similar ports to PCI via bridge chip often much larger than * the devices being glued. * * Author: Christopher G. Demetriou, May 14, 1998 (derived from NetBSD * sys/dev/pci/pciide.c, revision 1.6). * * These devices could be (and some times are) described as * communications/{serial,parallel}, etc. devices with known * programming interfaces, but those programming interfaces (in * particular the BAR assignments for devices, etc.) in fact are not * particularly well defined. * * After I/we have seen more of these devices, it may be possible * to generalize some of these bits. In particular, devices which * describe themselves as communications/serial/16[45]50, and * communications/parallel/??? might be attached via direct * 'com' and 'lpt' attachments to pci. */ #include #include #include #include #include #include #include #include #include #include #include "com.h" struct puc_pci_softc { struct puc_softc sc_psc; pci_chipset_tag_t pc; pci_intr_handle_t ih; }; int puc_pci_match(struct device *, void *, void *); void puc_pci_attach(struct device *, struct device *, void *); int puc_pci_detach(struct device *, int); const char *puc_pci_intr_string(struct puc_attach_args *); void *puc_pci_intr_establish(struct puc_attach_args *, int, int (*)(void *), void *, char *); int puc_pci_xr17v35x_intr(void *arg); const struct cfattach puc_pci_ca = { sizeof(struct puc_pci_softc), puc_pci_match, puc_pci_attach, puc_pci_detach }; struct cfdriver puc_cd = { NULL, "puc", DV_DULL }; const char *puc_port_type_name(int); int puc_pci_match(struct device *parent, void *match, void *aux) { struct pci_attach_args *pa = aux; const struct puc_device_description *desc; pcireg_t bhlc, subsys; bhlc = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_BHLC_REG); if (PCI_HDRTYPE_TYPE(bhlc) != 0) return (0); subsys = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_SUBSYS_ID_REG); desc = puc_find_description(PCI_VENDOR(pa->pa_id), PCI_PRODUCT(pa->pa_id), PCI_VENDOR(subsys), PCI_PRODUCT(subsys)); if (desc != NULL) return (1); return (0); } const char * puc_pci_intr_string(struct puc_attach_args *paa) { struct puc_pci_softc *sc = paa->puc; return (pci_intr_string(sc->pc, sc->ih)); } void * puc_pci_intr_establish(struct puc_attach_args *paa, int type, int (*func)(void *), void *arg, char *name) { struct puc_pci_softc *sc = paa->puc; struct puc_softc *psc = &sc->sc_psc; if (psc->sc_xr17v35x) { psc->sc_ports[paa->port].real_intrhand = func; psc->sc_ports[paa->port].real_intrhand_arg = arg; if (paa->port == 0) psc->sc_ports[paa->port].intrhand = pci_intr_establish(sc->pc, sc->ih, type, puc_pci_xr17v35x_intr, sc, name); return (psc->sc_ports[paa->port].real_intrhand); } psc->sc_ports[paa->port].intrhand = pci_intr_establish(sc->pc, sc->ih, type, func, arg, name); return (psc->sc_ports[paa->port].intrhand); } void puc_pci_attach(struct device *parent, struct device *self, void *aux) { struct puc_pci_softc *psc = (struct puc_pci_softc *)self; struct puc_softc *sc = &psc->sc_psc; struct pci_attach_args *pa = aux; struct puc_attach_args paa; pcireg_t subsys; int i; subsys = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_SUBSYS_ID_REG); sc->sc_desc = puc_find_description(PCI_VENDOR(pa->pa_id), PCI_PRODUCT(pa->pa_id), PCI_VENDOR(subsys), PCI_PRODUCT(subsys)); if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_EXAR && PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_EXAR_XR17V354) sc->sc_xr17v35x = 1; puc_print_ports(sc->sc_desc); for (i = 0; i < PUC_NBARS; i++) { pcireg_t type; int bar; sc->sc_bar_mappings[i].mapped = 0; bar = PCI_MAPREG_START + 4 * i; if (!pci_mapreg_probe(pa->pa_pc, pa->pa_tag, bar, &type)) continue; sc->sc_bar_mappings[i].mapped = (pci_mapreg_map(pa, bar, type, 0, &sc->sc_bar_mappings[i].t, &sc->sc_bar_mappings[i].h, &sc->sc_bar_mappings[i].a, &sc->sc_bar_mappings[i].s, 0) == 0); if (sc->sc_bar_mappings[i].mapped) { if (type == PCI_MAPREG_MEM_TYPE_64BIT) i++; continue; } #if NCOM > 0 /* * If a port on this card is used as serial console, * mapping the associated BAR will fail because the * bus space is already mapped. In that case, we try * to re-use the already existing mapping. * Unfortunately this means that if a BAR is used to * support multiple ports, only the first port will * work. */ if (pci_mapreg_info(pa->pa_pc, pa->pa_tag, bar, type, &sc->sc_bar_mappings[i].a, NULL, NULL) == 0 && pa->pa_iot == comconsiot && sc->sc_bar_mappings[i].a == comconsaddr) { sc->sc_bar_mappings[i].t = comconsiot; sc->sc_bar_mappings[i].h = comconsioh; sc->sc_bar_mappings[i].s = COM_NPORTS; sc->sc_bar_mappings[i].mapped = 1; if (type == PCI_MAPREG_MEM_TYPE_64BIT) i++; continue; } #endif printf("%s: couldn't map BAR at offset 0x%lx\n", sc->sc_dev.dv_xname, (long)bar); } /* Map interrupt. */ psc->pc = pa->pa_pc; if (pci_intr_map(pa, &psc->ih)) { printf("%s: couldn't map interrupt\n", sc->sc_dev.dv_xname); return; } paa.puc = sc; paa.intr_string = &puc_pci_intr_string; paa.intr_establish = &puc_pci_intr_establish; puc_common_attach(sc, &paa); } void puc_common_attach(struct puc_softc *sc, struct puc_attach_args *paa) { const struct puc_device_description *desc = sc->sc_desc; int i, bar; /* Configure each port. */ for (i = 0; i < PUC_MAX_PORTS; i++) { if (desc->ports[i].type == 0) /* neither com or lpt */ continue; /* make sure the base address register is mapped */ bar = PUC_PORT_BAR_INDEX(desc->ports[i].bar); if (!sc->sc_bar_mappings[bar].mapped) { printf("%s: %s port uses unmapped BAR (0x%x)\n", sc->sc_dev.dv_xname, puc_port_type_name(desc->ports[i].type), desc->ports[i].bar); continue; } /* set up to configure the child device */ paa->port = i; paa->a = sc->sc_bar_mappings[bar].a; paa->t = sc->sc_bar_mappings[bar].t; paa->type = desc->ports[i].type; if (desc->ports[i].offset >= sc->sc_bar_mappings[bar].s || bus_space_subregion(sc->sc_bar_mappings[bar].t, sc->sc_bar_mappings[bar].h, desc->ports[i].offset, sc->sc_bar_mappings[bar].s - desc->ports[i].offset, &paa->h)) { printf("%s: couldn't get subregion for port %d\n", sc->sc_dev.dv_xname, i); continue; } #if 0 if (autoconf_verbose) printf("%s: port %d: %s @ (index %d) 0x%x " "(0x%lx, 0x%lx)\n", sc->sc_dev.dv_xname, paa->port, puc_port_type_name(paa->type), bar, (int)paa->a, (long)paa->t, (long)paa->h); #endif /* and configure it */ sc->sc_ports[i].dev = config_found_sm(&sc->sc_dev, paa, puc_print, puc_submatch); } } int puc_pci_detach(struct device *self, int flags) { struct puc_pci_softc *sc = (struct puc_pci_softc *)self; struct puc_softc *psc = &sc->sc_psc; int i, rv; for (i = PUC_MAX_PORTS; i--; ) { if (psc->sc_ports[i].intrhand) pci_intr_disestablish(sc->pc, psc->sc_ports[i].intrhand); if (psc->sc_ports[i].dev) if ((rv = config_detach(psc->sc_ports[i].dev, flags))) return (rv); } for (i = PUC_NBARS; i--; ) if (psc->sc_bar_mappings[i].mapped) bus_space_unmap(psc->sc_bar_mappings[i].t, psc->sc_bar_mappings[i].h, psc->sc_bar_mappings[i].s); return (0); } int puc_print(void *aux, const char *pnp) { struct puc_attach_args *paa = aux; if (pnp) printf("%s at %s", puc_port_type_name(paa->type), pnp); printf(" port %d", paa->port); return (UNCONF); } int puc_submatch(struct device *parent, void *vcf, void *aux) { struct cfdata *cf = (struct cfdata *)vcf; struct puc_attach_args *aa = aux; if (cf->cf_loc[0] != -1 && cf->cf_loc[0] != aa->port) return 0; return ((*cf->cf_attach->ca_match)(parent, cf, aux)); } const struct puc_device_description * puc_find_description(u_int16_t vend, u_int16_t prod, u_int16_t svend, u_int16_t sprod) { int i; for (i = 0; i < puc_ndevs; i++) if ((vend & puc_devs[i].rmask[0]) == puc_devs[i].rval[0] && (prod & puc_devs[i].rmask[1]) == puc_devs[i].rval[1] && (svend & puc_devs[i].rmask[2]) == puc_devs[i].rval[2] && (sprod & puc_devs[i].rmask[3]) == puc_devs[i].rval[3]) return (&puc_devs[i]); return (NULL); } const char * puc_port_type_name(int type) { if (PUC_IS_COM(type)) return "com"; if (PUC_IS_LPT(type)) return "lpt"; return (NULL); } void puc_print_ports(const struct puc_device_description *desc) { int i, ncom, nlpt; printf(": ports: "); for (i = ncom = nlpt = 0; i < PUC_MAX_PORTS; i++) { if (PUC_IS_COM(desc->ports[i].type)) ncom++; else if (PUC_IS_LPT(desc->ports[i].type)) nlpt++; } if (ncom) printf("%d com", ncom); if (nlpt) { if (ncom) printf(", "); printf("%d lpt", nlpt); } printf("\n"); } int puc_pci_xr17v35x_intr(void *arg) { struct puc_pci_softc *sc = arg; struct puc_softc *psc = &sc->sc_psc; int ports, i; ports = bus_space_read_1(psc->sc_bar_mappings[0].t, psc->sc_bar_mappings[0].h, UART_EXAR_INT0); for (i = 0; i < 8; i++) { if ((ports & (1 << i)) && psc->sc_ports[i].real_intrhand) (*(psc->sc_ports[i].real_intrhand))( psc->sc_ports[i].real_intrhand_arg); } return (1); }