/* $OpenBSD: zs_ioasic.c,v 1.3 2022/01/09 05:43:00 jsg Exp $ */ /* $NetBSD: zs_ioasic.c,v 1.40 2009/05/12 13:21:22 cegger Exp $ */ /*- * Copyright (c) 1996, 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Gordon W. Ross, Ken Hornstein, and by Jason R. Thorpe of the * Numerical Aerospace Simulation Facility, NASA Ames Research Center. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Zilog Z8530 Dual UART driver (machine-dependent part). This driver * handles Z8530 chips attached to the DECstation/Alpha IOASIC. Modified * for NetBSD/alpha by Ken Hornstein and Jason R. Thorpe. NetBSD/pmax * adaption by Mattias Drochner. Merge work by Tohru Nishimura. * * Runs two serial lines per chip using slave drivers. * Plain tty/async lines use the zstty slave. */ #if 0 #include "zskbd.h" #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if defined(__alpha__) #include #endif /* * Helpers for console support. */ static void zs_ioasic_cninit(tc_addr_t, tc_offset_t, int); static int zs_ioasic_cngetc(dev_t); static void zs_ioasic_cnputc(dev_t, int); static void zs_ioasic_cnpollc(dev_t, int); #if 0 cons_decl(zs_ioasic_); #endif struct consdev zs_ioasic_cons = { NULL, NULL, zs_ioasic_cngetc, zs_ioasic_cnputc, zs_ioasic_cnpollc, NULL }; static tc_offset_t zs_ioasic_console_offset; static int zs_ioasic_console_channel; static int zs_ioasic_console; static struct zs_chanstate zs_ioasic_conschanstate_store; static int zs_ioasic_isconsole(tc_offset_t, int); static void zs_putc(struct zs_chanstate *, int); /* * Some warts needed by z8530tty.c */ int zs_def_cflag = (TTYDEF_CFLAG & ~(CSIZE | PARENB)) | CS8; #if defined(__alpha__) int zs_major = 15; #endif /* * ZS chips are fed a 7.372 MHz clock. */ #define PCLK (9600 * 768) /* PCLK pin input clock rate */ /* The layout of this is hardware-dependent (padding, order). */ struct zshan { #if defined(__alpha__) || defined(alpha) volatile u_int zc_csr; /* ctrl,status, and indirect access */ u_int zc_pad0; volatile u_int zc_data; /* data */ u_int sc_pad1; #endif }; struct zsdevice { /* Yes, they are backwards. */ struct zshan zs_chan_b; struct zshan zs_chan_a; }; static const uint8_t zs_ioasic_init_reg[16] = { 0, /* 0: CMD (reset, etc.) */ 0, /* 1: No interrupts yet. */ 0xf0, /* 2: IVECT */ ZSWR3_RX_8 | ZSWR3_RX_ENABLE, ZSWR4_CLK_X16 | ZSWR4_ONESB, ZSWR5_TX_8 | ZSWR5_TX_ENABLE, 0, /* 6: TXSYNC/SYNCLO */ 0, /* 7: RXSYNC/SYNCHI */ 0, /* 8: alias for data port */ ZSWR9_MASTER_IE | ZSWR9_VECTOR_INCL_STAT, 0, /*10: Misc. TX/RX control bits */ ZSWR11_TXCLK_BAUD | ZSWR11_RXCLK_BAUD, 22, /*12: BAUDLO (default=9600) */ 0, /*13: BAUDHI (default=9600) */ ZSWR14_BAUD_ENA | ZSWR14_BAUD_FROM_PCLK, ZSWR15_BREAK_IE }; static struct zshan * zs_ioasic_get_chan_addr(tc_addr_t zsaddr, int channel) { struct zsdevice *addr; struct zshan *zc; #if defined(__alpha__) addr = (struct zsdevice *)TC_DENSE_TO_SPARSE(zsaddr); #endif if (channel == 0) zc = &addr->zs_chan_a; else zc = &addr->zs_chan_b; return (zc); } /**************************************************************** * Autoconfig ****************************************************************/ /* Definition of the driver for autoconfig. */ static int zs_ioasic_match(struct device *, void *, void *); static void zs_ioasic_attach(struct device *, struct device *, void *); static int zs_ioasic_print(void *, const char *name); static int zs_ioasic_submatch(struct device *, void *, void *); struct cfdriver zs_cd = { NULL, "zs", DV_TTY }; const struct cfattach zs_ioasic_ca = { sizeof(struct zsc_softc), zs_ioasic_match, zs_ioasic_attach }; /* Interrupt handlers. */ static int zs_ioasic_hardintr(void *); static void zs_ioasic_softintr(void *); /* * Is the zs chip present? */ static int zs_ioasic_match(struct device *parent, void *vcf, void *aux) { struct ioasicdev_attach_args *d = aux; tc_addr_t zs_addr; /* * Make sure that we're looking for the right kind of device. */ if (strncmp(d->iada_modname, "z8530 ", TC_ROM_LLEN) != 0 && strncmp(d->iada_modname, "scc", TC_ROM_LLEN) != 0) return (0); /* * Find out the device address, and check it for validity. */ zs_addr = TC_DENSE_TO_SPARSE((tc_addr_t)d->iada_addr); if (tc_badaddr(zs_addr)) return (0); return (1); } /* * Attach a found zs. */ static void zs_ioasic_attach(struct device *parent, struct device *self, void *aux) { struct zsc_softc *zs = (void *)self; struct zsc_attach_args zs_args; struct zs_chanstate *cs; struct ioasicdev_attach_args *d = aux; struct zshan *zc; int s, channel; u_long zflg; printf("\n"); /* * Initialize software state for each channel. */ for (channel = 0; channel < 2; channel++) { zs_args.channel = channel; zs_args.hwflags = 0; zs_args.type = NULL; if (zs_ioasic_isconsole(d->iada_offset, channel)) { cs = &zs_ioasic_conschanstate_store; zs_args.hwflags |= ZS_HWFLAG_CONSOLE; } else { cs = malloc(sizeof(struct zs_chanstate), M_DEVBUF, M_NOWAIT | M_ZERO); zc = zs_ioasic_get_chan_addr(d->iada_addr, channel); cs->cs_reg_csr = (volatile void *)&zc->zc_csr; memcpy(cs->cs_creg, zs_ioasic_init_reg, 16); memcpy(cs->cs_preg, zs_ioasic_init_reg, 16); cs->cs_defcflag = zs_def_cflag; cs->cs_defspeed = 9600; /* XXX */ (void)zs_set_modes(cs, cs->cs_defcflag); } zs->zsc_cs[channel] = cs; zs->zsc_addroffset = d->iada_offset; /* cookie only */ cs->cs_channel = channel; cs->cs_ops = &zsops_null; cs->cs_brg_clk = PCLK / 16; /* * DCD and CTS interrupts are only meaningful on * SCC 0/B, and RTS and DTR only on B of SCC 0 & 1. * * XXX This is sorta gross. */ if (d->iada_offset == 0x00100000 && channel == 1) { cs->cs_creg[15] |= ZSWR15_DCD_IE; cs->cs_preg[15] |= ZSWR15_DCD_IE; zflg = ZIP_FLAGS_DCDCTS; } else zflg = 0; if (channel == 1) zflg |= ZIP_FLAGS_DTRRTS; cs->cs_private = (void *)zflg; /* * Clear the master interrupt enable. * The INTENA is common to both channels, * so just do it on the A channel. */ if (channel == 0) { zs_write_reg(cs, 9, 0); } /* * Set up the flow/modem control channel pointer to * deal with the weird wiring on the TC Alpha and * DECstation. */ if (channel == 1) cs->cs_ctl_chan = zs->zsc_cs[0]; else cs->cs_ctl_chan = NULL; if (d->iada_offset == 0x00100000) { if (channel == 0) zs_args.type = "vsms"; else zs_args.type = "zstty"; } else { if (channel == 0) zs_args.type = "lkkbd"; else { #if defined(__alpha__) if (cputype != ST_DEC_3000_300) #endif zs_args.type = "zstty"; } } /* * Look for a child driver for this channel. * The child attach will setup the hardware. */ if (zs_args.type == NULL || config_found_sm(self, (void *)&zs_args, zs_ioasic_print, zs_ioasic_submatch) == NULL) { /* No sub-driver. Just reset it. */ uint8_t reset = (channel == 0) ? ZSWR9_A_RESET : ZSWR9_B_RESET; s = splhigh(); zs_write_reg(cs, 9, reset); splx(s); } } /* * Set up the ioasic interrupt handler. */ ioasic_intr_establish(parent, d->iada_cookie, IPL_TTY, zs_ioasic_hardintr, zs, self->dv_xname); zs->zsc_sih = softintr_establish(IPL_SOFTSERIAL, zs_ioasic_softintr, zs); if (zs->zsc_sih == NULL) panic("%s: unable to register softintr", __func__); /* * Set the master interrupt enable and interrupt vector. The * Sun does this only on one channel. The old Alpha SCC driver * did it on both. We'll do it on both. */ s = splhigh(); /* interrupt vector */ zs_write_reg(zs->zsc_cs[0], 2, zs_ioasic_init_reg[2]); zs_write_reg(zs->zsc_cs[1], 2, zs_ioasic_init_reg[2]); /* master interrupt control (enable) */ zs_write_reg(zs->zsc_cs[0], 9, zs_ioasic_init_reg[9]); zs_write_reg(zs->zsc_cs[1], 9, zs_ioasic_init_reg[9]); #if defined(__alpha__) /* ioasic interrupt enable */ *(volatile u_int *)(ioasic_base + IOASIC_IMSK) |= IOASIC_INTR_SCC_1 | IOASIC_INTR_SCC_0; tc_mb(); #endif splx(s); } static int zs_ioasic_print(void *aux, const char *pnp) { struct zsc_attach_args *args = aux; if (pnp != NULL) printf("%s at %s", args->type, pnp); if (args->channel != -1) printf(" channel %d", args->channel); return (UNCONF); } static int zs_ioasic_submatch(struct device *parent, void *vcf, void *aux) { struct cfdata *cf = (struct cfdata *)vcf; struct zsc_attach_args *za = (struct zsc_attach_args *)aux; if (strcmp(cf->cf_driver->cd_name, za->type) != 0) return 0; return (*cf->cf_attach->ca_match)(parent, cf, aux); } /* * Hardware interrupt handler. */ static int zs_ioasic_hardintr(void *arg) { struct zsc_softc *zsc = arg; int rval; /* * Call the upper-level MI hardware interrupt handler. */ rval = zsc_intr_hard(zsc); /* * Check to see if we need to schedule any software-level * processing interrupts. */ if (rval != 0) { if (zsc->zsc_cs[0]->cs_softreq | zsc->zsc_cs[1]->cs_softreq) softintr_schedule(zsc->zsc_sih); } return rval; } /* * Software-level interrupt (character processing, lower priority). */ static void zs_ioasic_softintr(void *arg) { struct zsc_softc *zsc = arg; int s; s = spltty(); (void)zsc_intr_soft(zsc); splx(s); } /* * MD functions for setting the baud rate and control modes. */ int zs_set_speed(struct zs_chanstate *cs, int bps) { int tconst, real_bps; if (bps == 0) return (0); #ifdef DIAGNOSTIC if (cs->cs_brg_clk == 0) panic("zs_set_speed"); #endif tconst = BPS_TO_TCONST(cs->cs_brg_clk, bps); if (tconst < 0) return (EINVAL); /* Convert back to make sure we can do it. */ real_bps = TCONST_TO_BPS(cs->cs_brg_clk, tconst); #if 0 /* XXX - Allow some tolerance here? */ if (real_bps != bps) return (EINVAL); #endif cs->cs_preg[12] = tconst; cs->cs_preg[13] = tconst >> 8; /* Caller will stuff the pending registers. */ return (0); } int zs_set_modes(struct zs_chanstate *cs, int cflag) { u_long privflags = (u_long)cs->cs_private; int s; /* * Output hardware flow control on the chip is horrendous: * if carrier detect drops, the receiver is disabled, and if * CTS drops, the transmitter is stopped MID CHARACTER! * Therefore, NEVER set the HFC bit, and instead use the * status interrupt to detect CTS changes. */ s = splzs(); cs->cs_rr0_pps = 0; if ((cflag & (CLOCAL | MDMBUF)) != 0) { cs->cs_rr0_dcd = 0; if ((cflag & MDMBUF) == 0) cs->cs_rr0_pps = ZSRR0_DCD; } else cs->cs_rr0_dcd = ZSRR0_DCD; if ((cflag & CRTSCTS) != 0) { cs->cs_wr5_dtr = ZSWR5_DTR; cs->cs_wr5_rts = ZSWR5_RTS; cs->cs_rr0_cts = ZSRR0_CTS; #if defined(CDTRCTS) } else if ((cflag & CDTRCTS) != 0) { cs->cs_wr5_dtr = 0; cs->cs_wr5_rts = ZSWR5_DTR; cs->cs_rr0_cts = ZSRR0_CTS; #endif } else if ((cflag & MDMBUF) != 0) { cs->cs_wr5_dtr = 0; cs->cs_wr5_rts = ZSWR5_DTR; cs->cs_rr0_cts = ZSRR0_DCD; } else { cs->cs_wr5_dtr = ZSWR5_DTR | ZSWR5_RTS; cs->cs_wr5_rts = 0; cs->cs_rr0_cts = 0; } if ((privflags & ZIP_FLAGS_DCDCTS) == 0) { cs->cs_rr0_dcd &= ~(ZSRR0_CTS|ZSRR0_DCD); cs->cs_rr0_cts &= ~(ZSRR0_CTS|ZSRR0_DCD); } if ((privflags & ZIP_FLAGS_DTRRTS) == 0) { cs->cs_wr5_dtr &= ~(ZSWR5_RTS|ZSWR5_DTR); cs->cs_wr5_rts &= ~(ZSWR5_RTS|ZSWR5_DTR); } splx(s); /* Caller will stuff the pending registers. */ return (0); } /* * Functions to read and write individual registers in a channel. * The ZS chip requires a 1.6 uSec. recovery time between accesses, * and the Alpha TC hardware does NOT take care of this for you. * The delay is now handled inside the chip access functions. * These could be inlines, but with the delay, speed is moot. */ uint8_t zs_read_reg(struct zs_chanstate *cs, uint8_t reg) { volatile struct zshan *zc = (volatile void *)cs->cs_reg_csr; unsigned val; zc->zc_csr = reg << 8; tc_wmb(); DELAY(5); val = (zc->zc_csr >> 8) & 0xff; /* tc_mb(); */ DELAY(5); return (val); } void zs_write_reg(struct zs_chanstate *cs, uint8_t reg, uint8_t val) { volatile struct zshan *zc = (volatile void *)cs->cs_reg_csr; zc->zc_csr = reg << 8; tc_wmb(); DELAY(5); zc->zc_csr = val << 8; tc_wmb(); DELAY(5); } uint8_t zs_read_csr(struct zs_chanstate *cs) { volatile struct zshan *zc = (volatile void *)cs->cs_reg_csr; unsigned val; val = (zc->zc_csr >> 8) & 0xff; /* tc_mb(); */ DELAY(5); return (val); } void zs_write_csr(struct zs_chanstate *cs, uint8_t val) { volatile struct zshan *zc = (volatile void *)cs->cs_reg_csr; zc->zc_csr = val << 8; tc_wmb(); DELAY(5); } uint8_t zs_read_data(struct zs_chanstate *cs) { volatile struct zshan *zc = (volatile void *)cs->cs_reg_csr; unsigned val; val = (zc->zc_data) >> 8 & 0xff; /* tc_mb(); */ DELAY(5); return (val); } void zs_write_data(struct zs_chanstate *cs, uint8_t val) { volatile struct zshan *zc = (volatile void *)cs->cs_reg_csr; zc->zc_data = val << 8; tc_wmb(); DELAY(5); } /**************************************************************** * Console support functions ****************************************************************/ /* * Handle user request to enter kernel debugger. */ void zs_abort(struct zs_chanstate *cs) { u_int rr0; /* Wait for end of break. */ /* XXX - Limit the wait? */ do { rr0 = zs_read_csr(cs); } while (rr0 & ZSRR0_BREAK); #if defined(DDB) db_enter(); #else printf("zs_abort: ignoring break on console\n"); #endif } /* * Polled input char. */ int zs_getc(struct zs_chanstate *cs) { int s, c; u_int rr0; s = splhigh(); /* Wait for a character to arrive. */ do { rr0 = zs_read_csr(cs); } while ((rr0 & ZSRR0_RX_READY) == 0); c = zs_read_data(cs); splx(s); /* * This is used by the kd driver to read scan codes, * so don't translate '\r' ==> '\n' here... */ return (c); } /* * Polled output char. */ static void zs_putc(struct zs_chanstate *cs, int c) { int s; u_int rr0; s = splhigh(); /* Wait for transmitter to become ready. */ do { rr0 = zs_read_csr(cs); } while ((rr0 & ZSRR0_TX_READY) == 0); zs_write_data(cs, c); /* Wait for the character to be transmitted. */ do { rr0 = zs_read_csr(cs); } while ((rr0 & ZSRR0_TX_READY) == 0); splx(s); } /*****************************************************************/ /* * zs_ioasic_cninit -- * Initialize the serial channel for either a keyboard or * a serial console. */ static void zs_ioasic_cninit(tc_addr_t ioasic_addr, tc_offset_t zs_offset, int channel) { struct zs_chanstate *cs; tc_addr_t zs_addr; struct zshan *zc; u_long zflg; /* * Initialize the console finder helpers. */ zs_ioasic_console_offset = zs_offset; zs_ioasic_console_channel = channel; zs_ioasic_console = 1; /* * Pointer to channel state. */ cs = &zs_ioasic_conschanstate_store; /* * Compute the physical address of the chip, "map" it via * K0SEG, and then get the address of the actual channel. */ #if defined(__alpha__) zs_addr = ALPHA_PHYS_TO_K0SEG(ioasic_addr + zs_offset); #endif zc = zs_ioasic_get_chan_addr(zs_addr, channel); /* Setup temporary chanstate. */ cs->cs_reg_csr = (volatile void *)&zc->zc_csr; cs->cs_channel = channel; cs->cs_ops = &zsops_null; cs->cs_brg_clk = PCLK / 16; /* Initialize the pending registers. */ memcpy(cs->cs_preg, zs_ioasic_init_reg, 16); /* cs->cs_preg[5] |= (ZSWR5_DTR | ZSWR5_RTS); */ /* * DCD and CTS interrupts are only meaningful on * SCC 0/B, and RTS and DTR only on B of SCC 0 & 1. * * XXX This is sorta gross. */ if (zs_offset == 0x00100000 && channel == 1) zflg = ZIP_FLAGS_DCDCTS; else zflg = 0; if (channel == 1) zflg |= ZIP_FLAGS_DTRRTS; cs->cs_private = (void *)zflg; /* Clear the master interrupt enable. */ zs_write_reg(cs, 9, 0); /* Reset the whole SCC chip. */ zs_write_reg(cs, 9, ZSWR9_HARD_RESET); /* Copy "pending" to "current" and H/W. */ zs_loadchannelregs(cs); } /* * zs_ioasic_cnattach -- * Initialize and attach a serial console. */ void zs_ioasic_cnattach(tc_addr_t ioasic_addr, tc_offset_t zs_offset, int channel) { struct zs_chanstate *cs = &zs_ioasic_conschanstate_store; zs_ioasic_cninit(ioasic_addr, zs_offset, channel); cs->cs_defspeed = 9600; cs->cs_defcflag = (TTYDEF_CFLAG & ~(CSIZE | PARENB)) | CS8; /* Point the console at the SCC. */ cn_tab = &zs_ioasic_cons; cn_tab->cn_pri = CN_FORCED; cn_tab->cn_dev = makedev(zs_major, (zs_offset == 0x100000) ? 0 : 1); } #if 0 /* * zs_ioasic_lk201_cnattach -- * Initialize and attach a keyboard. */ int zs_ioasic_lk201_cnattach(tc_addr_t ioasic_addr, tc_offset_t zs_offset, int channel) { #if (NZSKBD > 0) struct zs_chanstate *cs = &zs_ioasic_conschanstate_store; zs_ioasic_cninit(ioasic_addr, zs_offset, channel); cs->cs_defspeed = 4800; cs->cs_defcflag = (TTYDEF_CFLAG & ~(CSIZE | PARENB)) | CS8; return (zskbd_cnattach(cs)); #else return (ENXIO); #endif } #endif static int zs_ioasic_isconsole(tc_offset_t offset, int channel) { if (zs_ioasic_console && offset == zs_ioasic_console_offset && channel == zs_ioasic_console_channel) return (1); return (0); } /* * Polled console input putchar. */ static int zs_ioasic_cngetc(dev_t dev) { return (zs_getc(&zs_ioasic_conschanstate_store)); } /* * Polled console output putchar. */ static void zs_ioasic_cnputc(dev_t dev, int c) { zs_putc(&zs_ioasic_conschanstate_store, c); } /* * Set polling/no polling on console. */ static void zs_ioasic_cnpollc(dev_t dev, int onoff) { }